SMPTE 311M Fiber Camera Cable: Remee 1202SMPTEBUB

ASF-FUW-PUW-1CSS-3F

$796.00
Unit price per
Quantity
  • These composite cables integrate power line for TV camera, control line and optical fiber for video & audio transmission.
  • Contains both copper conductors and singlemode optical fibers, allowing it to carry video, audio, data, and power signals. Its Thermoplstic Elastomer jacket is designed for connecting HD cameras to their control units (CCUs) over long distances in large venues and outdoor settings
  • Hybrid SMPTE 311M HDTV Standard Cable, 2 Single Mode OS2 Fibers, 2 TC Conductors 24 AWG (7x32) and 4 TC Conductors 20AWG (19x32), PE Insulation, TC Braid Shield (90% coverage)
  • Quality Built:
  • Test results supplied with each cable
  • Epoxy and Polish Lemo F2 fiber contacts
  • All Connectors include blanking/dust cap
  • Clear Heatshrink each end of cable
  • Highest Performance with LEMO F2 Fiber Contact:
  • The advantage of using epoxy and polish contacts is the reliability of the termination and longevity of the connector to assure a quality signal transmission.
  • These contacts are very robust and can withstand wide outdoor temperature variations.
  • Key Specifications:
  • Component 1 (power conductors): Four 20 AWG tinned copper (TC) stranded conductors with polyethylene (PE) insulation.
  • Component 2 (signal conductors): Two 24 AWG tinned copper (TC) stranded  conductors with PE insulation.
  • Component 3 (optical fibers): Two single-mode OS2 tight-buffered fibers.
  • Strength element: An up-jacketed stranded steel member provides crush resistance and pull strength.
  • Outer jacket: A UV resistant jacket made with a thermoplastic elastomer.
  • Crush resistance: 367 lbs.
  • Maximum cable pull strength: 160 lbs.
  • Temperature rating:  Operation: -40°C to +75°C
  • Installation: -20°C to +75°C

AVP guarantees products and equipment of its manufacture against all defects in material and/or workmanship and agrees to remedy any such defect at no charge provided the defective product is returned (transportation pre-paid) to AVP.

International returns (outside of Canada and continental USA) must have transportation pre- paid to and from AVP including all duties, taxes & brokerage, where applicable.

Warranties extend, as outlined below, from date of purchase, and do not extend to products which have been subjected to neglect, accident, or improper use. Warranties on any distributed product sold by AVP are subject solely to the manufacturers' written warranty. There are no other expressed or implied warranties except as set forth herein. There is no warranty covering consequential damages, incidental damages, or incidental expenses, including injury to persons or property.

  • Audio and Video Jacks: Lifetime
  • E-Series Video Jacks: 5 Years
  • Jack Panels and Bulkhead Panels: 5 Years
  • Bulkhead Connectors: 5 Years
  • Patchcords: 1 Year
  • RPT Punch Tool Tip: Lifetime
  • Fiber Optic Assemblies: 1 Year*

*Does not include wear and tear or airborne contaminants

All returns must have an RMA (Return Materials Authorization) number assigned by AVP customer service or sales departments. This number must be clearly marked on the outside of the box.

Ship all returns, with original packaging and all product components pre-paid to AVP at B5- 2288 Dumfries Rd. RR2, Cambridge Ontario Canada N1R 5S3. Any warranty returns back to the customer, will be shipped via ground service to continental USA & Canada.

All returned products with a valid RMA number will be evaluated. The issuance of an RMA number does not guarantee credit. If AVP deems that a product is defective and still within the warranty period, we will repair or replace the product, issue a refund, or credit your account at our discretion. Products accepted for return for reasons other than defect or error by AVP will be assessed a re-stocking fee and must be received within 30 days from date of shipment. Custom or special order products are only returnable due to manufacturing defects or error by AVP.

  • These composite cables integrate power line for TV camera, control line and optical fiber for video & audio transmission.
  • Contains both copper conductors and singlemode optical fibers, allowing it to carry video, audio, data, and power signals. Its Thermoplstic Elastomer jacket is designed for connecting HD cameras to their control units (CCUs) over long distances in large venues and outdoor settings
  • Hybrid SMPTE 311M HDTV Standard Cable, 2 Single Mode OS2 Fibers, 2 TC Conductors 24 AWG (7x32) and 4 TC Conductors 20AWG (19x32), PE Insulation, TC Braid Shield (90% coverage)
  • Quality Built:
  • Test results supplied with each cable
  • Epoxy and Polish Lemo F2 fiber contacts
  • All Connectors include blanking/dust cap
  • Clear Heatshrink each end of cable
  • Highest Performance with LEMO F2 Fiber Contact:
  • The advantage of using epoxy and polish contacts is the reliability of the termination and longevity of the connector to assure a quality signal transmission.
  • These contacts are very robust and can withstand wide outdoor temperature variations.
  • Key Specifications:
  • Component 1 (power conductors): Four 20 AWG tinned copper (TC) stranded conductors with polyethylene (PE) insulation.
  • Component 2 (signal conductors): Two 24 AWG tinned copper (TC) stranded  conductors with PE insulation.
  • Component 3 (optical fibers): Two single-mode OS2 tight-buffered fibers.
  • Strength element: An up-jacketed stranded steel member provides crush resistance and pull strength.
  • Outer jacket: A UV resistant jacket made with a thermoplastic elastomer.
  • Crush resistance: 367 lbs.
  • Maximum cable pull strength: 160 lbs.
  • Temperature rating:  Operation: -40°C to +75°C
  • Installation: -20°C to +75°C

AVP guarantees products and equipment of its manufacture against all defects in material and/or workmanship and agrees to remedy any such defect at no charge provided the defective product is returned (transportation pre-paid) to AVP.

International returns (outside of Canada and continental USA) must have transportation pre- paid to and from AVP including all duties, taxes & brokerage, where applicable.

Warranties extend, as outlined below, from date of purchase, and do not extend to products which have been subjected to neglect, accident, or improper use. Warranties on any distributed product sold by AVP are subject solely to the manufacturers' written warranty. There are no other expressed or implied warranties except as set forth herein. There is no warranty covering consequential damages, incidental damages, or incidental expenses, including injury to persons or property.

  • Audio and Video Jacks: Lifetime
  • E-Series Video Jacks: 5 Years
  • Jack Panels and Bulkhead Panels: 5 Years
  • Bulkhead Connectors: 5 Years
  • Patchcords: 1 Year
  • RPT Punch Tool Tip: Lifetime
  • Fiber Optic Assemblies: 1 Year*

*Does not include wear and tear or airborne contaminants

All returns must have an RMA (Return Materials Authorization) number assigned by AVP customer service or sales departments. This number must be clearly marked on the outside of the box.

Ship all returns, with original packaging and all product components pre-paid to AVP at B5- 2288 Dumfries Rd. RR2, Cambridge Ontario Canada N1R 5S3. Any warranty returns back to the customer, will be shipped via ground service to continental USA & Canada.

All returned products with a valid RMA number will be evaluated. The issuance of an RMA number does not guarantee credit. If AVP deems that a product is defective and still within the warranty period, we will repair or replace the product, issue a refund, or credit your account at our discretion. Products accepted for return for reasons other than defect or error by AVP will be assessed a re-stocking fee and must be received within 30 days from date of shipment. Custom or special order products are only returnable due to manufacturing defects or error by AVP.