Neutrik opticalCON Duo, Chassis connector, 4 solder contacts, 1 LC-Duplex feedthru socket and 1 shell ground contact (for SMPTE cable shield)

UMNO2-4FDW-1-A

$165.35
Unit price per
  • Ships in 1-3 business days
Quantity

AVP Mfg. & Supply Inc., founded in 1985, is a manufacturer of commercial broadcast, telecom, and satellite equipment, including the design and manufacturing of audio, video, and digital jackfields, connectors, wire and cable assemblies. AVP sells through world-wide distribution, and also partners directly with clients, designing and manufacturing custom jackfield and panel solutions for its broadcast, telecom, and satellite customers and OEM relationships.

    Neutrik‚ opticalCON Duo chassis connector acts as a "feedthru" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D-type size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.‚

    Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

    Features & Benefits
    • Suggested OEM equipment connector due to LC front compatibility
    • Designed as feedthru with automatic sealing shutter
    • Shutter with silicone gasket protects optical connection from dust and dirt
    • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
    • Accommodates standard LC connectors on the rear for simple installation
    • Connection on the front side either by rugged opticalCON or standard LC connector
    • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
    • Water resistant according to IP65 ingress protection in mated condition
    • In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
    UMNO2-4FDW-1-A PDF DWG DXF

    AVP guarantees products and equipment of its manufacture against all defects in material and/or workmanship and agrees to remedy any such defect at no charge provided the defective product is returned (transportation pre-paid) to AVP.

    International returns (outside of Canada and continental USA) must have transportation pre- paid to and from AVP including all duties, taxes & brokerage, where applicable.

    Warranties extend, as outlined below, from date of purchase, and do not extend to products which have been subjected to neglect, accident, or improper use. Warranties on any distributed product sold by AVP are subject solely to the manufacturers' written warranty. There are no other expressed or implied warranties except as set forth herein. There is no warranty covering consequential damages, incidental damages, or incidental expenses, including injury to persons or property.

    • Audio and Video Jacks: Lifetime
    • E-Series Video Jacks: 5 Years
    • Jack Panels and Bulkhead Panels: 5 Years
    • Bulkhead Connectors: 5 Years
    • Patchcords: 1 Year
    • RPT Punch Tool Tip: Lifetime
    • Fiber Optic Assemblies: 1 Year*

    *Does not include wear and tear or airborne contaminants

    All returns must have an RMA (Return Materials Authorization) number assigned by AVP customer service or sales departments. This number must be clearly marked on the outside of the box.

    Ship all returns, with original packaging and all product components pre-paid to AVP at B5- 2288 Dumfries Rd. RR2, Cambridge Ontario Canada N1R 5S3. Any warranty returns back to the customer, will be shipped via ground service to continental USA & Canada.

    All returned products with a valid RMA number will be evaluated. The issuance of an RMA number does not guarantee credit. If AVP deems that a product is defective and still within the warranty period, we will repair or replace the product, issue a refund, or credit your account at our discretion. Products accepted for return for reasons other than defect or error by AVP will be assessed a re-stocking fee and must be received within 30 days from date of shipment. Custom or special order products are only returnable due to manufacturing defects or error by AVP.

    AVP Mfg. & Supply Inc., founded in 1985, is a manufacturer of commercial broadcast, telecom, and satellite equipment, including the design and manufacturing of audio, video, and digital jackfields, connectors, wire and cable assemblies. AVP sells through world-wide distribution, and also partners directly with clients, designing and manufacturing custom jackfield and panel solutions for its broadcast, telecom, and satellite customers and OEM relationships.

      Neutrik‚ opticalCON Duo chassis connector acts as a "feedthru" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D-type size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection.‚

      Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

      Features & Benefits
      • Suggested OEM equipment connector due to LC front compatibility
      • Designed as feedthru with automatic sealing shutter
      • Shutter with silicone gasket protects optical connection from dust and dirt
      • Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
      • Accommodates standard LC connectors on the rear for simple installation
      • Connection on the front side either by rugged opticalCON or standard LC connector
      • The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
      • Water resistant according to IP65 ingress protection in mated condition
      • In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.
      UMNO2-4FDW-1-A PDF DWG DXF

      AVP guarantees products and equipment of its manufacture against all defects in material and/or workmanship and agrees to remedy any such defect at no charge provided the defective product is returned (transportation pre-paid) to AVP.

      International returns (outside of Canada and continental USA) must have transportation pre- paid to and from AVP including all duties, taxes & brokerage, where applicable.

      Warranties extend, as outlined below, from date of purchase, and do not extend to products which have been subjected to neglect, accident, or improper use. Warranties on any distributed product sold by AVP are subject solely to the manufacturers' written warranty. There are no other expressed or implied warranties except as set forth herein. There is no warranty covering consequential damages, incidental damages, or incidental expenses, including injury to persons or property.

      • Audio and Video Jacks: Lifetime
      • E-Series Video Jacks: 5 Years
      • Jack Panels and Bulkhead Panels: 5 Years
      • Bulkhead Connectors: 5 Years
      • Patchcords: 1 Year
      • RPT Punch Tool Tip: Lifetime
      • Fiber Optic Assemblies: 1 Year*

      *Does not include wear and tear or airborne contaminants

      All returns must have an RMA (Return Materials Authorization) number assigned by AVP customer service or sales departments. This number must be clearly marked on the outside of the box.

      Ship all returns, with original packaging and all product components pre-paid to AVP at B5- 2288 Dumfries Rd. RR2, Cambridge Ontario Canada N1R 5S3. Any warranty returns back to the customer, will be shipped via ground service to continental USA & Canada.

      All returned products with a valid RMA number will be evaluated. The issuance of an RMA number does not guarantee credit. If AVP deems that a product is defective and still within the warranty period, we will repair or replace the product, issue a refund, or credit your account at our discretion. Products accepted for return for reasons other than defect or error by AVP will be assessed a re-stocking fee and must be received within 30 days from date of shipment. Custom or special order products are only returnable due to manufacturing defects or error by AVP.