Neutrik opticalCON Duo, Chassis connector, 4 solder contacts, 1 LC-Duplex feedthru socket and 1 shell ground contact (for SMPTE cable shield)

Neutrik opticalCON Duo, Chassis connector, 4 solder contacts, 1 LC-Duplex feedthru socket and 1 shell ground contact (for SMPTE cable shield)

Model: UMNO2-4FDW-1-A
  • SKU: 907219
$110.01
  • Ships in 1-3 business days

Neutrik opticalCON Duo chassis connector acts as a "feedthru" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D-type size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. 

Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Features & Benefits

• Suggested OEM equipment connector due to LC front compatibility
• Designed as feedthru with automatic sealing shutter
• Shutter with silicone gasket protects optical connection from dust and dirt
• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
• Accommodates standard LC connectors on the rear for simple installation
• Connection on the front side either by rugged opticalCON or standard LC connector
• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
• Water resistant according to IP65 ingress protection in mated condition
• In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.

UMNO2-4FDW-1-A PDF DWG DXF

Neutrik opticalCON Duo chassis connector acts as a "feedthru" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D-type size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. 

Not compatible to SMPTE 304M standard. Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage.

Features & Benefits

• Suggested OEM equipment connector due to LC front compatibility
• Designed as feedthru with automatic sealing shutter
• Shutter with silicone gasket protects optical connection from dust and dirt
• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
• Accommodates standard LC connectors on the rear for simple installation
• Connection on the front side either by rugged opticalCON or standard LC connector
• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
• Water resistant according to IP65 ingress protection in mated condition
• In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.

UMNO2-4FDW-1-A PDF DWG DXF